User's Manual

AE04B-A0279 Rev -- APPENDIXA: AMPLIFIER INSTALLATION
Document use is restricted to that described on cover
A-1
APPENDIX A
AMPLIFIER INSTALLATION
1. List of Material
• Qty 1 – SELECTAMP800 Amplifier
• Qty 1 - User Guide (AE02B-AXXXX)
• Qty 1 - Programming Cable (ECATL-80700)
• Qty 1 - Adapter, RJ45 to DB9 (AE02M-D0419-001)
• Qty 1 - Adapter, RJ45 to DB25 (AE02M-D0420-001)
• Qty 1 - Power Cable, 12 ft. (AE02C-D3300-001)
• Qty 1 - Diskette containing SMARTpc Lite software for Amplifier Control
(AE02R-AXXXX-XXX)
2. Tools Required
• Qty 1 - 3/8 in. Electric Drill
• Qty 1 - 3/8 in. Diameter Drill Bit
• Qty 1 - 3/8 in. Diameter Masonry Drill Bit
• Qty 1 - No. 2 Phillips Screw Driver
• Qty 1 - No. 2 Flat Head Screw Driver
• Qty 1 - 9/16 Wrench
• Qty 1 - Pair of Medium Wire Cutters
• Qty 1 - Laptop Computer
• Qty 1 - Amplifier Mounting Kit (EENCL-90004)
3. Determine Location for Amplifier
1. Determine if the amplifier will be mounted on a wall or a pole.
2. If amplifier is going to be mounted on a wall, is it concrete or wallboard?
3. If amplifier is going to be mounted on a pole, what is the diameter of the pole? The
Amplifier mounting kit will support a pole up to 12 inches in diameter.
4. Locate the amplifier within 10 feet of a VAC @50/60 Hz Electrical Outlet.