Andrew operation and maintenance : Technical data : Page 9

Bolts and Wrenches Chart, Possible US to Metric Substitution During 4.0 Meter ESA Installation**

Bolt Open Wrench Metric Bolt (Gr 8.8 DIN 933) Open Wrench

Location BOM Item No. Base Diam. Length Qty. Material inches Base Diam. Standard Length Material millimeters

Sub 2 7 3/8-16 1.5 8 SS 9/16 M10 x 1.5 40 #933 A4 17

Reﬂector

2 8 3/8-16 1.125 4 SS 9/16 M10 x 1.5 30 #933 A4 17

2 12 3/8-16 6 3 SS 9/16 M10 x 1.5 120 #933 A2 17

Reﬂector 3 111 5/16-18 1.25 40 SS 1/2 M8 x 1.25 30 #933 A4 13

3 117 3/8-16 1.5 15 SS 9/16 M10 x 1.5 40 #933 A4 17

3 121 1/4-20 1.25 24 SS /8 M6 x 1 30 #933 A4 10

3 125 M6 1 250 SS 5 mm Allen M6 25 Hot dip Glv 5mm Allen

3 126 3/8 SHLDR 0.75 15 SS 9/16 SHLDR 20 SO 7379, I12.9 5mm Allen

M10/M8 x 1.25 CLASS

20 mm SHLDR Length,

13 mm THRD Length

Mount 3 101 3/4-10 2 40 G 1 1/8 M20 x 2.5 50 Hot Dip Glv 30

3 107 1-8 5 1 G 1 1/2 M24 x 3 130 Hot Dip Glv 36

3 108 1-8 2.5 2 G 1 1/2 M24 x 3 65 Hot Dip Glv 36

3 111 5/8-11 2.25 4 SS 15/16 M18 x 2.5 60 Hot Dip Glv 27

3 115 3/4-10 10 1 SS 1 1/8 M20 x 2.5 180 #933 A2 30

3 120 Rod End 3/4” 2 - Rod end 47 Hot Dip Glv -

M20 x 1.5,

20mm ball /

Articulated rod ends

#648 “K” K20MR

3 123 3/4-10 5 4 g 1 1/8 M20 x 2.5 130 Hot Dip Glv 30G

Nuts and Wrenches Chart, Possible US to Metric Substitution During 4.0 Meter ESA Installation**

Nut Open Wrench Nuts (Gr 8.8 DIN 934) Open Wrench

Location BOM Item No. Base Diam. Length Qty. Material inches Base Diam. Material millimeters

Sub 2 6 3/8-16 28 ss 9/16 M10 x 1.5 #934 A4 17

Reﬂector

2 13 3/8-16 thin 9 ss 9/16 M10 x 1.5 #439 B-A4 17

2 15 3/8-16 6 ss 9/16 M10 x 1.5 #934 A4 17

Reﬂector 3 114 5/16-18 60 ss 1/2 M8 x 1.25 #934 A4 8

3 116 M6 1 250 ss 13mm M6 Hot Dip Glv 13

3 120 3/8-16 15 ss 9/16 M10 x 1.5 #934 A4 17

3 124 1/4-20 24 ss 7/16 M6 X 1 #934 A4 10

3 102 1 1/2-6 4 ss 2 1/4 M36 x 4* #934 A4 55

3 105 3/4-10 35 g 1 M20 x 2.5 Hot Dip Glv 30

3 109 1-8 10 g 1 5/16 M24 x 3 Hot Dip Glv 36

Mount 3 114 5/8-11 8 ss 27/32 M18 x 2.5 #934 A4 27

3 121 1 1/2-6 drilled 1 g 2 1/4 M36 x 4* Hot Dip Glv 55

3 124 3/4-16 thin 3 g 1 M20 x 2.5 #439 B-A2 30

* - For Reference only. ** - Lock and Flat washers choose according to speciﬁed Bolts & Nuts size

Tool and Hardware Conversion Chart

8