Technical data

Andrew recommends that the following tools be used for a proper
installation of the Earth Station Antenna.
Table 1. Recommended Tools
Tool Size Qty.
Open End Wrench 13 mm 2
3/8” 2
1/2” 2
9/16” 2
1 1/8” 2
1.5” 2
15/16” 2
2 1/4” 2
1” 2
1 5/16” 2
27/32” 2
Drive Sockets 7/16” 2
9/16” 1
1” 2
13mm 1
Spud Wrench 1-1/16“ 1
Breaker Bar 1/2” 1
Screw Driver Standard 1
Phillips 1
Allen Wrench 5 mm 1
Tape Measure Standard 1
Felt-tip Marker Standard 1
Hammer Standard 1
Rubber Mallet Standard 1
Pry Bar Standard 1
Tin Snips Standard 1
Crane 1 Ton Minimum Capacity 1
Rope/Cord (2000 lb breaking strength) 50 ft 1
Shackles 5/8“ 2
Ladder 10 Foot Extension 1
Nylon Web Sling 3” x 3’ 2
Getting Started
Recommended Tools
7