Technical data

First lay subreflector struts on the ground. Use 3/8-16 bolts, lock washers, nuts and four
L-brackets to combine struts. Attach U-brackets to struts with bolts, lock washers and nuts.
Installation Procedures
Feed Strut Assembly
Step 1
Step 2
Step 3
52
Figure 72
Attached adjustment
plate (303763) to
the U-brackets. Hand
tighten all bolts/nuts.
Attached remaining L-brackets to the ends of the struts with 3/8 long hardware and hand
tighten.
Figure 74
Figure 73