Specifications

Subreflector
Support Brackets
Step 1
18
Installation Procedures
Attach four 206278 lifting tabs across the second and third pairs of reflector seam holes
from reflector center as shown in Figure 8. Note: Do not fully tighten lifting tab hardware
at this time.
Figure 8
206278
Lifting Tab
1/4 x 1-1/4”
Socket Head
Capscrew
(45055-2)
1/4”
Lock
Washer
(9974-15)
1/4”
Hex
Nut
(9999-57)
Note: To be removed after reflec-
tor installation on ground mount.
Reference Drawing 240272