Installation, Operation and Maintenance 4.5-Meter Earth Station Antenna ES45T

Step 4

Step 5

Installation Procedures

Raise segments and hold while loosely attaching mounting ring hub (P/N 49965) to con-

vex side of center opening.

• Use ¼-20 capscrews, lockwashers and nuts

• Insert capscrews from concave side of reflector segments

Loosely attach reflector segments A-B and D-E to diameter setting bands (P/N 49426)

with edge joining plates (P/N 49424) and capscrew hardware as shown in Figure 23.

• Use ¼-20 capscrews, lockwashers and nuts

• Insert capscrews from concave side of reflector segments

Figure 23

ES45T-R Reflector Assembly