User guide

ATC200-LITE-USB Teletilt

RET System Section 23–Changing the Operating Mode on a TMA

Bulletin 639536 • Revision L October 2014 23-3

8. When the operating mode of the TMA has been successfully completed, the Column Mode

will display the new mode (Figure 23-4).

Note. If a TMA is changes its operating mode to bypass mode, the current Gain provided

by device is zero. If a TMA is changed from bypass to normal (Ampliﬁer On) mode the

current Gain shown is the stored value in the device.

Figure 23-4. Operating Mode changed for TMA