Troubleshooting guide

Section 13–USB Driver Issues-ATC200-LITE-USB Remote Electrical Downtilt System Handbook
13-2 May 2009 Bulletin 639519 • Revision D
If “ATC200-LITE-USB” is not found in a branch:
Screen Title(s) Action
Go to Control Panel. Click on Add Hardware.
Add Hardware Wizard: Welcome
to the Add Hardware Wizard
Next
(Wait for search to fi nish.)
Found New Hardware Wizard:
Welcome to the Found New Hard-
ware Wizard
Select No, not this time.
Next
Found New Hardware Wizard
Select Install from a list…
Next
Found New Hardware Wizard:
Please choose your search and
installation options.
Select Include this location in the search:
[If the default fi le was used at installation, enter C:\
Program Files→Andrew Corporation→ATC Lite.
Otherwise, go to the desktop, right click on the ATC
Lite icon and click on properties to get the folder
where the driver is located.]
Next
Hardware Installation
Click on Continue Anyway.
Wait for install.
If you get the response Files Needed, reenter the
fi le from previous step. (Check spelling.)
OK
Found New Hardware Wizard:
Completing the Found New Hard-
ware Wizard
Finish
Add Hardware Wizard: Complet-
ing the Add Hardware Wizard
Finish
Table 13-2. Correcting USB Driver Problems.