Technical information

OM93_Rev H Page 4 of 28
List of Figures
Figure 1-1a: Bolts Shorter than 4 Diameters 9
Figure 1-1b: Bolts Longer than 4 Diameters 9
Figure 1-2: Scraping Foundation Pads 10
Figure 3-1: Pure Noise Signal on Spectrum Analyzer 12
Figure 3-2: Minimum Transponder Signal on Spectrum Analyzer 12
Figure 3-3: Antenna Radiation Pattern Topographical Diagram w/ Plan View 13
Figure 3-4: Polarization at 45 Degrees from Optimum Setting 14
Figure 3-5: Maximizing Odd Transponders 14
Figure 3-6: Optimum Polarization Settings 14
Figure 4-1: High-Speed Antenna Lubrication Points 21
Figure 4-2: Medium-Speed Antenna Lubrication Points 22
Figure 5-1: Jac/Jack Anti-Backlash Procedure 26
List of Tables
Table 1.1: Recommended Tools 8
Table 1.2: 9.3m Assembly & Installation Drawings 10
Table 4.1: Lubrication Chart 20
Table 5.1: Cure Times 25
Table 5.2: Maintenance Kits 26
Table A.2: Sector Change Required Tools 27