Technical information

OM93_Rev H Page 20 of 28
corrosion, imbedded dirt, grease, and oil deposits or the paint will not adhere to the surface. Lacquer
thinner will dissolve paint if applied heavily and rubbed vigorously. Do not use bleach, soap solutions, or
kerosene as it is difficult to remove the residue. Allow the clean surface to dry thoroughly before painting.
Paint the cleaned surface with a zinc-rich paint. The paint can be applied with a brush, roller, or
pressurized spray. If necessary, thin the paint with the appropriate thinner to the proper consistency.
Thoroughly paint over the cleaned surface and blend with the existing painted surface.