User's Manual
Table Of Contents
- 1. General
- 2. Introduction
- 3. Functional Description
- 4. Commissioning
- 4.1. General
- 4.2. High Power RU Mechanical Installation
- 4.3. Electrical Installation
- 4.3.1. Health and Safety for electrical installation
- 4.3.2. Property Damage Warnings for electrical installation
- 4.3.3. Connections
- 4.3.4. Grounding (Earthing)
- 4.3.5. Connection of the antenna cable
- 4.3.6. Mains power connection
- 4.3.7. Extension Unit port connection
- 4.3.8. External alarm In / Out port
- 4.3.9. RS 485 /+28 V port
- 4.3.10. Local interface port
- 4.3.11. Coupling Probe
- 4.3.12. Optical-fiber cable connection
- 4.3.13. Assembly instructions for optical LC patch cables
- 4.3.14. Optional equipment for optical fiber connection
- 4.4. Commissioning Flow-Chart
- 5. Alarms
- 6. Maintenance
- 7. Appendix
- 8. Index
4. Commissioning
M0200A8C_uc_ION-U_H_7P_80-85P_17P_19P User’s Manual for ION
®
-U Page 41
4.3.13. Assembly instructions for optical LC patch cables
The ION-U H 7P/80-85P/17P/19P utilizes a single fiber cable for both uplink and
downlink. The RU optical connector (Opus short plug kit) supports both simplex (one
fiber cable) and duplex (two fiber cables) operation.
The Opus short plug kit, which is included with the delivery of the RU, has the
following components.
figure 4-21 Contents of the Opus short plug kit
The LC/APC patch cables must meet the following requirements shown in figure 4-22
for use with the RU and the Opus short plug kit.
figure 4-22 LC/APC patch cable requirements
F Note: You must pay close attention to the integrity of the fiber during the
assembly process.