User's Manual

5. Low Power EU Maintenance
Page 54 7.Manual ION-U_EU_L_23_23 M0F200AFA.docx
11. Replace the defective power
supply with the new power
supply.
It is very important to confirm
that the replacement supply is
the same type as the original
supply. The AC, DC, and
Vdc/100 supplies are not
interchangeable.
12. Reconnect the input and
output connectors, and tighten
the associated terminal
screws.
figure 5-8 EU with replacement power supply
13. Insert the power supply into
the EU carefully to avoid
damaging any cables. The
supply must be supported until
the 8 universal slot/Phillips
captive power supply screws
have been tightened.
14. Tighten the 8 universal
slot/Phillips captive power
supply screws.
figure 5-9 EU insert power supply