User's Manual

5. Low Power EU Maintenance
7.Manual ION-U_EU_L_23_23 M0F200AFA.docx Page 53
6. Locate the input cable
connector for the power
supply on the right side of the
supply.
7. Loosen the 3 Phillips head
terminal screws and remove
the connector.
figure 5-5 EU power supply input cable
8. Locate the output connector
for the power supply on the
left side of the supply.
9. Loosen the 2 Phillips head
screws and remove the output
connector.
figure 5-6 EU power supply output cable
10. Remove the defective supply.
figure 5-7 EU with power supply removed