User's Manual

4. Commissioning
7.Manual ION-U_EU_L_23_23 M0F200AFA.docx Page 31
6. Fasten the lower section of the second unit to the bracket using a washer and an
M6x12 screw (on both sides). Slide a washer over each screw and then insert
the screw and tighten it securely.
figure 4-14 Install M6x12 screws and washers 2
nd
unit
7. Fasten the unit to the bracket using a washer and M6 nut. Slide the washer over
the threaded pins that you installed previously (chapter 4.1.3) and then screw the
nut onto the pins (on both sides) and tighten securely.
figure 4-15 Attach M6 nut to threaded pins for 2
nd
unit
8. Confirm that all screws and nuts have been fastened and the unit is securely
mounted to the wall.
M6x12 screw
Washer
B0402AWA
Washer
M6 Nut
B0402AXA