User's Manual

4. Commissioning
Page 30 7.Manual ION-U_EU_L_23_23 M0F200AFA.docx
4. Fasten the unit to the bracket using a washer and M6 nut. Slide the washer over
the threaded pins that you installed previously (chapter 4.1.3) and then screw the
nut onto the pins (on both sides) and tighten securely.
figure 4-12 Attach M6 nut to threaded pins
5. Install the second unit on the wall-mounting bracket by lifting the unit into place
and lowering it down onto the bracket. The 2
nd
unit is reversed in direction from
the 1
st
unit. The M6 pins must align with the slots in the bracket to support the
unit.
figure 4-13 2
nd
unit on wall mounting bracket
Washer
M6 Nut
B0402AT
A
B0402AVA