User's Manual

4. Commissioning
7.Manual ION-U_EU_L_23_23 M0F200AFA.docx Page 27
3. Fasten the lower section of the unit to the bracket using a washer and an
M6x12 screw (on both sides). Slide a washer over each screw and then insert
the screw and tighten it securely.
figure 4-7 Install M6x12 screws and washers for single mount
4. Fasten the unit to the bracket using a washer and M6 nut. Slide the washer
over the threaded pins that you installed previously (chapter 4.1.3) and then
screw the nut onto the pins (on both sides) and tighten securely.
figure 4-8 Attach M6 nut to threaded pins for single mount
5. Confirm that all screws and nuts have been fastened and the unit is securely
mounted to the wall.
B0400ALA
M6x12 screw
Washer
B0400AMA
M6 nut
Washer