User's Manual

4. Commissioning

7.Manual ION-U_EU_L_23_23 M0F200AFA.docx Page 23

4.1.3.2. Mount to a pole

Mounting kits are available for poles from 4“ to 18” (10.2 cm to 45.8 cm) and for 40”

(1 m).

1. Mount the mounting bracket to

the four screw pins of the two

pole-mounting brackets with M6

plain washers (9), split lock

washers (10) and self lock nuts

(8).

2. Screw a M8 nut (4) to one end of

each of the eight threaded bolts

and slide a plain washer (5) on

the bolt.

3. Screw the end of the threaded

bolts (with the nut and washer)

from the inner side to the welded

nuts of the pole-mounting

bracket. Use the nuts that allow

to mount the mounting kit with

the threaded bolts as close to the

pole as possible. Lock the

screwing by fastening the M8

nut.