User's Manual

7. Appendix
Page 46 User’s Manual for ION
®
-U
7.2. Specifications
This manual is valid for the following Extension Units:
ID No Denomination
7698401-xxxx* ION-U EU H 7P/80-85P/17P/19P
7698401-0001 ION-U EU H 7P/80-85P/17P/19P AC
7698401-0002 ION-U EU H 7P/80-85P/17P/19P DC
7698401-0003 ION-U EU H 7P/80-85P/17EP/19P
A
C
7698401-0004 ION-U EU H 7P/80-85P/17EP/19P DC
* The xxxx suffix is the identifier for the specific configuration of the Extension Unit.
Please refer to the ION-U EU H 7P/80-85P/17(E)P/19P data sheet for the ION-U HP
EU specifications.
7.3. Spare Parts
Maintenance of the EU should be performed on an FRU (Field Replaceable Unit)
basis only. If any FRU not contained in the following list needs to be replaced, please
contact customer service for additional instructions.
Designation: ID No
Fan Unit M2-Cabinet 7661556-xx
Pole-mounting kit M2-cab* 7661538
Pole-mounting kit M2-cab with brackets* 7690784
Wall-mounting kit M2-cab* 7661581
* One of the three mounting kits has to be ordered separately. They are not contained within the
standard equipment.
The manufacturer reserves the right to replace the spare parts listed above by
equivalent substitutes.
Note: Only the spare parts listed above are FRUs and can be replaced by the
user. For replacement of any other parts, please send the entire Extension
Unit back to the manufacturer.
7.4. List of Changes
Version Changes Release Date
M0200A9B 30-June-2015
M0200A9C - chapters 1.3 and 4.3.2 updated, duplicate warning
removed
- chapter 1.4 adjusted, single carrier and Class B
- chapters 4.1 and 6.1 updated, warranty and mounting
kits
- chapter 4.2.2 updated, 50 mm distance
- chapters 4.3.2 and 4.3.5 updated, no N connector,
4.3-10 torque wrench
- chapter 4.3.5.1 updated, warnings
- chapter 6.3 updated, warning
- chapter 7.3 updated, EU IDs
- chapter 7.3 updated, mounting kits
23-November-2015
M0200A9D ION-U EU H 7P/80-85P/17EP/19P added Not yet released