Installation Instruction
Table Of Contents
- 1. General
- 2. Introduction
- 3. Functional Description
- 4. Commissioning
- 4.1. General
- 4.2. High Power EU Mechanical Installation
- 4.3. Electrical Installation
- 4.4. Commissioning Flow-Chart
- 5. Alarms
- 6. Maintenance
- 7. Appendix
- 8. Index
7. Appendix
Page 46 M0200A9C_uc_ION-U_EU_H_7P_80-85P_17P_19P User’s Manual for ION
®
-U
7.2. Specifications
This manual is valid for the following Extension Units:
ID No
Denomination
7698401-xxxx*
ION-U EU H 7P/80-85P/17P/19P
* The xxxx suffix is the identifier for the specific configuration of the Extension Unit.
Please refer to the ION-U EU H 7P/80-85P/17P/19P data sheet for the ION-U HP EU
specifications.
7.3. Spare Parts
Maintenance of the EU should be performed on an FRU (Field Replaceable Unit)
basis only. If any FRU not contained in the following list needs to be replaced, please
contact customer service for additional instructions.
Designation: ID No
Fan Unit M2-Cabinet
7661556-xx
The manufacturer reserves the right to replace the spare parts listed above by
equivalent substitutes.
F Note: Only the spare part listed above is a FRU and can be replaced by the user.
For replacement of any other parts, please send the entire Extension Unit
back to the manufacturer.
7.4. List of Changes
Version
Changes
Release Date
M0200A9B
30-June-2015
M0200A9C
- chapter 1.4 adjusted
08-July-2015