Installation Instruction
Table Of Contents
- 1. General
- 2. Introduction
- 3. Functional Description
- 4. Commissioning
- 4.1. General
- 4.2. High Power EU Mechanical Installation
- 4.3. Electrical Installation
- 4.4. Commissioning Flow-Chart
- 5. Alarms
- 6. Maintenance
- 7. Appendix
- 8. Index
4. Commissioning
Page 24 M0200A9C_uc_ION-U_EU_H_7P_80-85P_17P_19P User’s Manual for ION
®
-U
10. Notice: For unstabilized electric networks, which frequently generate spikes, the
use of a voltage limiting device is advised.
11. Notice: Observe the labels on the front panels before connecting or
disconnecting any cables.
12. Notice: Unused connectors must be closed with their protective covers to
ensure water tightness.
4.3.3. Connections
The ION-U EU ports and connectors shown below are located at the base of the EU.
figure 4-11 ION-U EU H 7P/80-85P/17P/19P AC version connector flange
A
B
C
D
E
F