User's Manual
Table Of Contents
- 1. General
- 2. Introduction
- 3. Functional Description
- 4. Commissioning
- 4.1. General
- 4.2. High Power EU Mechanical Installation
- 4.3. Electrical Installation
- 4.4. Commissioning Flow-Chart
- 5. Alarms
- 6. Maintenance
- 7. Appendix
- 8. Index
7. Appendix
M0200ABA_ION-U_EU_H_23_23 User’s Manual for ION
®
-U Page 47
7.2. Specifications
This manual is valid for the following Extension Units:
ID No
Denomination
7698403-xxxx*
ION-U EU H 23/23
* The xxxx suffix is the identifier for the specific configuration of the Extension Unit.
Please refer to the ION-U EU H 23/23 data sheet for the ION-U HP EU
specifications.
7.3. Spare Parts
Maintenance of the EU should be performed on an FRU (Field Replaceable Unit)
basis only. If any FRU not contained in the following list needs to be replaced, please
contact customer service for additional instructions.
Designation: ID No
Fan Unit M2-Cabinet
7661556-xx
The manufacturer reserves the right to replace the spare parts listed above by
equivalent substitutes.
F Note: Only the spare part listed above is a FRU and can be replaced by the user.
For replacement of any other parts, please send the entire Extension Unit
back to the manufacturer.