User's Manual

5. Low Power RU Maintenance
MF0200A5C_ION-U_L_7_80-85_17EP_19P.docx Manual for ION
®
-U Page 61
3. Locate the power supply on
the right side of the Remote
Unit.
figure 5-2 RU power supply location
4. Use a #2 Phillips head or
slotted screwdriver to loosen
the 8 universal slot/Phillips
captive power supply screws
and carefully remove the
supply. The weight of the
power supply must be
supported as you loosen the
screws to prevent damage to
the supply.
figure 5-3 8 RU power supply screws
5. Carefully remove the power
supply from the unit. Do not
attempt to support the weight
of the supply with the attached
input and output cables.
figure 5-4 RU power supply with cables
Mains
connecto
r
Power
supply
Loosen 8 universal
slot/Phillips screws