User's Manual

4. Commissioning
Page 52 MF0200A5C_ION-U_L_7_80-85_17EP_19P.docx Manual for ION
®
-U
 Connect the optical cables to the proper UL and DL LC/APC connectors.
figure 4-31 Optical cables connected
 Separate the two halves of the split-seal. Place both cables into the grooves of
each half of the split-seal. Insert the spit seal into the clamp jacket.
figure 4-32 Place cables into split-seal
 Insert the clamp jacket with split seal to the connector socket and fasten them
with the sealing nut.
Split-seal
Clamp jacket
Connect
LC/APC optical
cables
Sealing nut
Connector
socket