User's Manual

4. Commissioning
MF0200A5C_ION-U_L_7_80-85_17EP_19P.docx Manual for ION
®
-U Page 51
 Remove the sealing nut from the optical cable gland at the bottom of the RU.
figure 4-29 Remove sealing nut
 Remove the split-seal and clamp jacket.
figure 4-30 Split-seal and clamp jacket
 Insert the optical cables through the sealing nut and the clamp jacket.
 Then insert the optical cables through the connector socket into the cabinet.
Sealing
nut
Split-seal
Sealing nut
Optical
connectors
Clamp
jacket