User's Manual

4. Commissioning

MF0200A5C_ION-U_L_7_80-85_17EP_19P.docx Manual for ION

-U Page 31

figure 4-14 Install M6x12 screws and washers 2

7. Fasten the RU to the bracket using a washer and M6 nut. Slide the washer over

the threaded pins that you installed previously (chapter 4.1.3) and then screw the

nut onto the pins (on both sides) and tighten securely.

figure 4-15 Attach M6 nut to threaded pins for 2

8. Confirm that all screws and nuts have been fastened and the unit is securely

mounted to the wall.

M6x12 screw

Washer

M6 Nut