User's Manual

4. Commissioning
Page 30 MF0200A5C_ION-U_L_7_80-85_17EP_19P.docx Manual for ION
®
-U
figure 4-12 Attach M6 nut to threaded pins
5. Install the second RU on the wall-mounting bracket by lifting the RU into place
and lowering it down onto the bracket. The 2
nd
RU is reversed in direction from
the 1
st
RU. The M6 pins must align with the slots in the bracket to support the
RU.
figure 4-13 2
nd
RU on wall mounting bracket
6. Fasten the lower section of the second RU to the bracket using a washer and an
M6x12 screw (on both sides). Slide a washer over each screw and then insert
the screw and tighten it securely.
Washer
M6 Nut