User's Manual

4. Commissioning
MF0200A5C_ION-U_L_7_80-85_17EP_19P.docx Manual for ION
®
-U Page 29
figure 4-10 1
st
RU placed on wall mounting bracket - MIMO
3. Fasten the lower section of the first RU to the bracket using a washer and an
M6x12 screw (on both sides). Slide a washer over each screw and then insert
the screw and tighten it securely.
figure 4-11 Install M6x12 screws and washers
4. Fasten the RU to the bracket using a washer and M6 nut. Slide the washer over
the threaded pins that you installed previously (chapter 4.1.3) and then screw the
nut onto the pins (on both sides) and tighten securely.
M6x12 screw
Washer