User's Manual

4. Commissioning
Page 28 MF0200A5C_ION-U_L_7_80-85_17EP_19P.docx Manual for ION
®
-U
figure 4-9 Completed SISO RU mount
4.1.6. Wall mounting procedure – Dual Units (MIMO)
For MIMO operation, two LP RUs are mounted on a single wall bracket.
1. Follow the instructions for mounting the bracket and installing the threaded pins
in chapter 4.1.3.
2. Install the first Remote Unit on the wall-mounting bracket by lifting the RU into
place and lowering it down onto the bracket. The M6 pins must align with the
slots in the bracket to support the RU. Note that the first RU is installed with the
curved side facing you, which is the opposite of the installation procedure for
SISO (one unit) mounting.