User's Manual

User’s Manual for ION-B Systems
Page 33
7. Separate the two halves of the split-seal. Place one cable into the hole and the
other in the groove of each half of the split-seal. Insert the spit seal into the
clamp jacket.
Figure 2-22 Place cables into split-seal
8. Insert the clamp jacket with split seal to the connector socket and fasten them
with the sealing nut.
Figure 2-23 Optical cable installed
9. Replace the optics metal cover and tighten the four screws that were
loosened in step 1.
Split-seal
Clamp jacket
Sealing nut
Connector
socket