User's Manual

User’s Manual for ION-B Systems
Page 18
Manual TFAH-
ES70_80_50.doc
Wall-Mounting
1. Check the suitability of the wall-mounting kit and the wall.
2. Install the wall-
mounting bracket using 4 M6 screw anchors (not included*) or
suitable lag bolts according to the drilling layout.
Confirm that the bracket is
securely fastened to the wall. Installer must verify that the supporting surface
will safely support the combined load of the electronic equipment and all
attached hardware and components.
*
The M6 screw anchors are not included as part of the RU delivery because
the suitable type depends on the on-site conditions (wall structure and materials).
Use screw anchors that are appropriate for the mounting surface.
Wall-mounting bracket