User's Manual

User’s Manual for ION-B Systems
Page 35
7. Separate the two halves of the split-seal. Place one cable into the hole and the
other in the groove of each half of the split-seal. Insert the spit seal into the
clamp jacket.
Place cables into split-seal
8. Insert the clamp jacket with split seal to the connector socket and fasten them
with the sealing nut.
Optical cable installed
9. Replace the optics metal cover and tighten the four screws that were
loosened in step 1.
Split-seal
Clamp jacket
Sealing nut
Connector
socket