User Manual

6. Description of Web GUI
Page 44
MF0123A1A PSR 700/800 MHz
Save Button: Save the changed Date/Time and Time Zone on the Device.
PC Time Set: Save the Date/time of the PC to the device (However, Time Zone
should set to item 1).
Note: Date/Time is reset if the repeater power is left off for more than 2 days
6.7. System Operation
6.7.1. Active Alarm
update of screen shot required
1) You can view the current Active Alarm.
2) Alarm test is a function that performs an Alarm Simulation.
When Alarm Test is On status, the Alarm LED and Alarm Relay are selected as the
actual Alarm.
Alarm Count: Auto / Manual Alarm count displayed.
Alarm History Storage: When Alarm Test is ON, it should store as a Manual trigged
Alarm.
Temperature Alarm test is not available.