User Manual

4. Commissioning
Page 22
MF0123A1A PSR 700/800 MHz
6. Clean the inside surface of the
inner ring with a cotton bud
drenched with isopropyl alcohol.
7. Clean the inside of the center
conductor spring tines with a cotton
bud drenched with isopropyl
alcohol.
8. Clean in the similar way the
connector of the connected cable.
Remove protective caps from the
unit connector first.
9. Remove metal chips and small
particles from the mating and inner
surfaces of the connector using
compressed air.
10. Continue with the winding area
using lint-free wipe drenched with
isopropyl alcohol.