User's Manual

5. Setting up the Web GUI
Page 50
MF0123A1F_FCC_uc Manual for PSR 700/800 MHz
5.7. System Operation
5.7.1. Active Alarm
1) You can view the currently active alarms.
2) Alarm test is a function that performs an alarm simulation: This includes sending
SNMP traps as well as activating the related LED and relay.
Alarm Count: Auto / Manual Alarm count displayed.
Alarm History Storage:
When Alarm Test is ON, the alarm is stored as a manually triggered alarm in the alarm
history.
Test Duration:
When Alarm Test is switched ON, a 10-minute counter starts. After the counter has
reached zero, the alarm test is switched OFF automatically. The individual remaining
time is displayed in the Test Duration column.
Temperature Alarm test is not available.