User's Manual

5. Setting up the Web GUI
Page 48
MF0123A1F_FCC_uc Manual for PSR 700/800 MHz
5.6.13. Site Location
Use this page to enter the Site Location information:
CompanyName:
You can enter up to 30 characters.
Address:
You can enter up to 30 characters.
City:
You can enter up to 30 characters.
State/Province/Territory:
You can enter up to 10 characters.
Zip/Postal Code:
You can enter up to 10 characters.
Contact:
You can enter up to 20 characters.
Click the Save button to save the Site
Location information on the device.
5.6.14. Time and Date
Use this page to enter the Time and Date information:
Time Zone: When Time Zone is
selected, the daylight-saving time is
applied.
Date and Time: Press the Refresh
button to get the current repeater
date and time; the user can change
the Date and Time manually.
Save Button: Save the changed
Date/Time and Time Zone on the
Device.
Save with PC Time: Save the
date/time of the connected PC to
the device (you should have set the
Time Zone before).
Note Date/Time is reset if PSR power is off for more than 2 days.