User's Manual

5. Setting up the Web GUI
Page 38
MF0123A1F_FCC_uc Manual for PSR 700/800 MHz
5.6.2. Software Upgrade
Note: The SW update process will take approximately 3min 45sec overall. A loss of
service for about 3 min 15 sec has to be expected.
Proceed as follows:
Get an update file from CommScope Technical Support (see chapter 1.6.1) and store
the file at a suitable location where you can access it.
Click the Choose File button and select the software update file from where you stored
it previously. Open the file and click the Update button to start the software update.
NOTE: Do not turn off the device during software updates since this might result
in system corruption.
During the update process the
following information is displayed:
When the update is complete, you
automatically move to the Login
page.