User's Manual

4. Commissioning
Page 28
MF0123A1F_FCC_uc Manual for PSR 700/800 MHz
2. Join the connectors and turn the
coupling nut until the thread grips.
3. Push in the connector until it clicks.
4. Fasten the coupling nut hand-tight. Do
not turn the connector but the
coupling nut only.
5. Retain the cable connector with the
counter wrench and fasten the
coupling nut with the torque wrench
until the torque is applied (torque
wrench clicks).
For angled antenna connectors use
your hand to retain the cable connector
and fasten the coupling nut with the
torque wrench. Make sure only the
coupling nut is turned, not the cable
connector.
Torque wrench
Counter
wrench