User's Manual

4. Commissioning
MF0123A1F_FCC_uc Manual for PSR 700/800 MHz
Page 27
10. Continue with the winding area using
lint-free wipe drenched with
isopropyl alcohol.
11. Continue with the inside mating
surface of the inner ring.
12. Clean the outside surface of the
center pin.
4.2.7. Antenna Cable Connector Assembly
The figures in this chapter illustrate the connection procedure and do not show the actual
unit.
1. What is needed for the connector
assembly?
a. Torque wrench.
b. (Adjustable) counter
wrench