User's Manual
Table Of Contents
- 1. GENERAL
- 2. INTRODUCTION
- 3. COMMISSIONING
- 3.1. MECHANICAL INSTALLATION
- 3.2. ELECTRICAL INSTALLATION
- 3.3. CONNECTION OF THE ANTENNA CABLES
- 3.4. POWER CONNECTION
- 3.5. OPTICAL-FIBER-CABLE CONNECTION - RULES
- 3.6. COMMISSIONING
- 3.7. BITE AND ALARMS
- 3.8. HANDLING OF ALARMS
- 3.9. ALARM STATUS
- 3.10. STATUS LED ALARMS
- 3.11. EXTERNAL ALARM INPUTS AND OUTPUTS
- 3.12. TROUBLESHOOTING
- 4. MAINTENANCE
- 5. APPENDIX
- 6. INDEX
- LIST OF CHANGES
Page 41 MF0143AUB.doc
5.2. SPECIFICATIONS
5.2.1. Electrical Specifications
ION-M7P/85P/17P/19P
Electrical
Mains power 115 Vac or 230 Vac
Power supply
Power consumption 1050 W
Optical
Connectors E2000/APC 8°
Optical return loss 45 dB min.
Fiber type Single mode E9/125 mm
Optical link budget 0 dB to 10 dB
All figures are typical values, unless otherwise stated
All data is subject to change without notice.
5.2.2. Mechanical Specifications
Height, width, depth * 817 x 245 x 218 mm (32.2 x 9.6 x 8.6 in)
Weight 34 kg (75 Ib)
* Spacing required 40 mm (1.58 in) around unit
All data is subject to change without notice.
5.2.3. Environmental and Safety Specifications
Note: For detailed information, please refer to the Environmental and
Safety Specifications leaflet of the supplier, related to ETS 300 019
(European Telecommunication Standard).
Operating temperature range -33 °C to +50°C
RF part IP67
Ingress protection
Fan part IP55
All data is subject to change without notice.