User's Manual

User’s Manual for
ION
®
-M7P/80-85HP/9 (W2-Cabinet)
Page 14
Manual ION-M7P_80-85HP_9
MF0145APA.doc
The ION-M7P/80-85HP/9 has been specifically tested and optimized for GMSK,
EDGE, CDMA, WCDMA, and LTE modulation in the 700 MHz, 800/850 MHz, 900
MHz band as well as AMPS, LMR and analogue modulations.
By means of a coupling port AWS (1700/2100) and PCS (1900) provided by a
separate ION-M can be combined with 700 MHZ, 800 MHz, 850 MHz, and 900 MHz
to one antenna port. The Remote Unit is equipped with an extension port to upgrade
the system for supporting AWS/PCS.
The ION is easily set-up and supervised via a graphical user interface (GUI). Remote
units can be commissioned through the use of built-in test equipment. An auto-
leveling function compensates for the optical link loss making installation easy and
quick. The entire system may be monitored remotely via an Andrew OMC. This
platform uses SNMP protocol and is compliant to X.733 standard.
Should a sophisticated interface not be required, the master unit can be directly
connected to the alarm interface of a base station via its contact relay.
Features:
 Multi-channel, multi-operator support
 Efficient, high power amplifiers
 Single fiber for MIMO and multiple remotes
 Comprehensive operations and management system for configuration and
alarming
 OMC with SNMP according to X.733 standard
 3GPP TS25.143/TS25.106/ TS36.143/TS36.106 and 3GPP2C.S0051-0
compliant
 Single fiber for multiple bands and multiple remotes
 Easy installation and commissioning