User's Manual

User’s Manual for ION
®
--M7P/17HP (M-cab)
& Sub-Assemblies
Page 44 MF0145AQA.doc
5. To mount the new fan unit, re-connect the earth-bonding cable and the fan
connector (see step 4). Then, place the fan unit back into its original position and
fasten it tight as shown below:
6. Screw the whole fan unit to the cabinet with the four tallow-drop screws M4x8
(see step 2). In order not to exceed the specified torque of 3.3 N-m, use an
appropriate tool.