User's Manual

1. General

MF0145ASA.docx User’s Manual for ION

-M7HP/85HP EU Page 9

3. Notice: Installation of this equipment is in full responsibility of the installer, who

has also the responsibility, that cables and couplers are calculated into the

maximum gain of the antennas, so that this value, which is filed in the FCC Grant

and can be requested from the FCC data base, is not exceeded. The industrial

boosters are shipped only as a naked booster without any installation devices or

antennas as it needs for professional installation.

4. Notice: Corresponding local particularities and regulations must be observed. For

national deviations, please refer to the respective documents included in the

manual CD that is delivered with the unit.

5. Note: This unit complies with European standard EN60950.

Equipment Symbols Used / Compliance

Please observe the meanings of the following symbols used in our equipment and

the compliance warnings:

Symbol Compliance Meaning / Warning

--- FCC

WARNING: This is NOT a CONSUMER device. It

is designed for installation by FCC LICENSEES

and QUALIFIED INSTALLERS. You MUST have

an FCC LICENSE or express consent of an FCC

Licensee to operate this device. You MUST

CFR 90.219) online at www.fcc.gov/signal-

boosters/registration. Unauthorized use may

result in significant forfeiture penalties, including

penalties in excess of $100,000 for each

continuing violation.

Alert sign to R&TTE

To be sold exclusively to mobile operators or

authorized installers – no harmonized frequency

bands, operation requires license. Intended use:

EU and EFTA countries

Indicates conformity with the R&TTE directive

1999/5/EC certified by the notified body no. 0700.