User's Manual

3. Commissioning
Page 28 MF0145ASA.docx User’s Manual for ION
®
-M7HP/85HP EU
3.2.7. Antenna Cable Connector Assembly
The figures in this chapter illustrate the cleaning procedure and do not show the
actual RU.
1. What is needed for the connector
assembly?
a. Torque wrench.
b. (Adjustable) counter
wrench
2. Join the connectors and turn the
coupling nut until the thread grips.
3. Push in the connector until it clicks.
4. Fasten the coupling nut hand-tight. Do
not turn the connector but the coupling
nut only.