User's Manual

3. Commissioning
MF0145ASA.docx User’s Manual for ION
®
-M7HP/85HP EU Page 21
3.1.6. Mounting of DC Box
The DC Box is pre-mounted on a mounting plate which has to be fastened to the
lower mounting bracket of the RU after it has been mounted to a wall or pole as
explained in the previous chapters.
Fasten the mounting plate of the DC Box to the lower mounting bracket of the RU
using the four pan head screws M4.0x8mm (observe torque of 3.0 N-m) that are part
of the delivery:
figure 3-7 Mounting of DC Box
figure 3-8 Mounting of DC Box, finished
Lower mounting bracket of RU
Mounting plate of DC Box
DC Box