User's Manual

3.2.5. Connection of AC Mains Power
Before connecting electrical power to the units, the system must be grounded as
described in the previous chapter.
Mains power must be connected at the mains connectors of the unit (see chapter
3.2.2 Connections).
The power supply plug is part of the delivery. The correct wiring of the power supply
plug is as follows:
2 AC mains cable connector
Cover of mains connectors
fastened =>
Remove cover(s) to access
PINs!
figure 3-6 Position of AC mains connectors at connector flange
Mains 1 + 2 Power Connectors- AC PIN Assignment:
Cov
er of
mains connectors
removed
figure 3-7 AC mains plug, front view
Page 21 MF0145A8A_FCC modif.doc