User's Manual

14. The unit complies with the surge requirement according to EN 61000-4-5 (fine
protection); however, it is recommended to install an additional medium (via local
supply connection) and/or coarse protection (external surge protection) depending
on the individual application in order to avoid damage caused by overcurrent.
15. Observe the labels on the front panels before connecting or disconnecting any
cables!
3.2.2. Connections
Page 19 MF0145A8A_FCC modif.doc
figure 3-2 Connector flange of ION-M7HP/7HP/85HP/19P
Please observe the following two caution labels attached to the unit cabinet:
figure 3-3 Caution labels
Cable glands for
connection of external
alarms inputs/ outputs
Optical-fibre connector
Status LED
7/16-connector
Mobile 1
700 MHz
Grounding bolt
Mains
connectors
7/16-connector
Mobile 2
1900 M
Hz