User's Manual

2. Introduction
MF0145AUA.doc Manual for ION
®
-M7P/7P/17P Page 15
The ION is easily set-up and supervised via a graphical user interface (GUI). Remote
units can be commissioned through the use of built-in test equipment. An auto-
leveling function compensates for the optical link loss making installation easy and
quick. The entire system may be monitored remotely via an Andrew OMC. This
platform uses SNMP protocol and is compliant to X.733 standard.
Should a sophisticated interface not be required, the master unit can be directly
connected to the alarm inter-face of a base station via its contact relay.
 Multi-channel, multi-operator support
 Reduced visual impact form factor
 Efficient, high power amplifiers
 Single fiber for MIMO and multiple Remote Units
 Comprehensive operations and management system for configuration and
alarming
 A.I.M.O.S. with SNMP according to X.733 standard
 With reference to 3GPP TS25.143/TS25.106/ TS36.143/TS36.106 and
3GPP2C.S0051-0
 Easy installation and commissioning