User's Manual

4. Commissioning
Page 40 MF0150A2A.doc Manual for ION-M7P/85P/17EP/19P
Unscrew the two M3 x 12 captive screws
and take off the cover from the DC Mains
connector housing. At the RU housing
the cover is inserted into a recess, so first
lift the cover at the front and carefully pull
it out from the recess.
Then remove the rubber plug.
Double lug DC cable connectors need to
be M6 with a stud hold spacing of 15.88
mm (5/8”).
Rubber
plug