User's Manual
Table Of Contents
- 1.1. USED ABBREVIATIONS
- 1.2. HEALTH AND SAFETY WARNINGS
- 1.3. ABOUT COMMSCOPE SOLUTIONS
- 1.4. INTERNATIONAL CONTACT ADDRESSES FOR CUSTOMER SUPPORT
- 2. INTRODUCTION
- 3. 3. COMMISSIONING
- 4. ALARMS
- 5. MAINTENANCE
- 6. APPENDIX
- 7. INDEX
41 of 46
5. To mount the new fan unit, re-connect the earth-bonding cable and the fan
connector (see step 4). Then, place the fan unit back into its original position and
fix it tight as shown below:
6. Screw the whole fan unit to the cabinet with the four tallow-drop screws M4x8
(see step 2). In order not to exceed the specified torque of 330 Ncm, use an
appropriate tool.