User's Manual

15 of 46
provide homogeneous coverage. The compact, mechanical design is specifically
architected to mount inside of or on poles and along side structures in such a way
that it has a minimal visual impact.
It has been specifically tested and optimized for CDMA2000, EV-DO, WCDMA and
LTE. Furthermore it is provisioned for future improvements to the modulation and
frequency bands.
The ION-M19P/19P/19P can be easily set-up and supervised via a graphical user
interface (GUI). Remote units can be commissioned through the use of built-in test
equipment.
An auto-leveling function compensates for the optical link loss making installation
easy and quick. The entire system may be monitored remotely via an Andrew OMC.
This is a comprehensive management platform with SNMP protocol and X.733
standard implemented. Should a sophisticated interface not be re-quired, the master
unit can be directly connected to the alarm interface of a base station via relay
alarming.
 3 sector multi-operator support
 Reduced visual impact form factor
 Efficient, high power amplifier
 Single fibre for multiple sectors
 Comprehensive operations and management system for configuration and
alarming
 OMC with SNMP according to X.733 standard
 Easy installation and commissioning
2.2.1. Fan-Protection Kit
In order to protect the fan unit (e.g. against rain), a protective cover to be mounted
over the air inlet is delivered with the unit. For indoor applications, mounting of the
fan-protection kit is not mandatory.
For more details see chapter 3.1.4 Mounting of Fan Protection.
2.2.2. Accessories
For the accessories available for the remote unit, e.g. overcoat housing, connecting
box or iso-trafo kit, a separate manual is available.